Natural Fracture Systems and Fractured Hydrocarbon Accumulations, Mechanics and Management
|Dr Dirk Nieuwland (NewTec International, Leiden, Netherlands)|
|Geology – Geological Modeling|
|10 CPD points|
3D CLAY DRILLING FAULTS FRACTURES HIGH‑RESOLUTION SHALE SHALE GAS UNCONVENTIONAL WELL LOG
In this short course a geomechanical approach to the prediction of the location and orientation of open and closed fractures will be discussed. Fractures are discontinuities in brittle rocks that are the result of failure of the rocks. The mechanical rock properties and the failure conditions determine whether the type of failure is an open or closed fracture. Geomechanically, joints are large examples of tension fractures and faults are large examples of shear fractures. Tension fractures are always open when they form and it is this property that makes these small discontinuities so important for the exploitation of oil and gas from tight reservoir rocks. Prediction of the location and orientation of open fractures is complicated by the small size of fractures. They are so small that they are below the detection limit of many of the commonly used tools such as well logs or seismic. Fracture detection by seismic methods is basically impossible but some high-resolution logging tools can detect fractures if the circumstances are suitable. If both logs and seismic cannot detect fractures, geomechanical modelling is often turned to as the last resort. However, it is often possible to apply basic geomechanics with success, without having to rely on sophisticated software. A major disadvantage of high end software is, that such programs require a vast amount of detailed input. Such detail is not always available. Even when sufficient detailed data are available, it is a major effort to generate the required input for the software. The advantage of an analogue approach is that it can be done with much less data, quicker and a lot cheaper. The result will of course be in less detail than that of 3D geomechanical output but the cost-effectiveness of an analogue (analytical) approach is high and the 'first pass results' provide a good and reliable basis for further work.
This short course presents the fundamental geomechanics that is required to achieve a sound understanding of natural fracture systems, to predict the basic elements of natural fracture systems and to extract the wealth of information that is contained in natural fault and fracture systems, to the benefit of further development of naturally fractured systems. The term ‘reservoirs’ has been deliberately avoided, because unconventional hydrocarbon accumulations such as found in tight reservoirs or shales, do not form ‘reservoirs’ in the classic meaning of the word. This is particularly so in shales, where the gas that is contained in the shales is adsorbed to clay minerals and cannot flow naturally. In such unconventional hydrocarbon systems, geomechanics is often the last and only resort to predicting attractive drilling locations, orientations and well stimulation such as hydraulic fracturing. A newly developed demonstration experiment will be used to illustrate the development of intersecting tension fracture systems.
Assess the possibilities to approach the exploration and development of unconventional hydrocarbon systems. These can be shale gas systems, other forms of tight reservoirs or fractured crystalline basements.
The course will begin with an introduction to geomechanics as the basic 'tool' to understand natural fracture systems and naturally fractured unconventional hydrocarbon systems. Natural fracture systems and the associated properties will be considered. Boundary conditions of artificial hydraulic fracturing will be discussed, with the exception of details of the hydraulic fracture design, which does not form part of this course.
Case histories of tight and unconventional reservoirs will be presented for discussion.
Participants are strongly recommended to bring their own case examples for treatment and discussion as this will enable immediate application of the course content to the current work environment of the participant.
Geologists, geophysicists and reservoir engineers who work with faulted and fractured reservoirs will benefit from this short course. The topic is relevant for exploration as well for production. A recent expansion of the course topics includes exploration and development of shale gas systems.
Participants should have knowledge of general geology and structural geology and basic physics. A basic knowledge of geomechanics is an advantage but is not strictly required.
About the instructor
Prof. Dr Nieuwland has 39 years of experience as a geologist, including 35 years in oil and gas exploration and production. He has published numerous papers in this field and edited two books in the Special Publication series of the Geological Society of London.
One of NewTec's geo-mechanical field models resulted in adding a billion bbls of oil to the reserves of a tight naturally fractured oil reservoir, including accurate prediction of open fracture locations and orientation, in-situ stresses and reservoir quality. Other models have successfully guided exploration, appraisal and development in complex geological settings, including a world first successful prediction of open fractures in a fractured oil bearing crystalline basement.
Any structural geology textbook will give sufficient background knowledge to follow this short course successfully.
Explore other courses under this discipline:
Instructor: Dr Dave L. Cantrell (Cantrell GeoLogic and Stanford University, USA)
Reservoir quality prediction has long been the ultimate goal of industry geologists, yet few have achieved this in a truly quantitative fashion. This workshop presents a new approach to reservoir quality prediction that involves the integration of a variety of modeling techniques to understand, quantify and predict the geological processes that control reservoir quality. Since initial reservoir quality is established at the time of deposition, numerical process models are used to predict initial reservoir quality; diagenetic process models are then used to modify these initial results and ultimately produce a quantitative and geologically-based prediction of present-day subsurface reservoir quality.
Instructors: Prof. Dr Stephen Tyson and Dr Ing Sebastian Hörning (Universiti Teknologi Brunei and The University of Queensland)
The course will show the attendees how to test for linear spatial dependence and introduce the concepts of non-linear geostatistics. Attendees will develop an excel spreadsheet and a python notebook which can be used for spatial data analysis and non-linear stochastic simulation. Existing geostatistics algorithms based on the kriging matrix can be shown to underestimate the connectivity of extreme values because they assume a linear spatial dependence model. Moreover, the estimation of uncertainty based on these techniques uses the kriging variance, which is not dependent on the values of the spatially distributed variable. It can also be shown that these uncertainty estimate are often implausible. This course will explain the reasons why most spatial variables in geoscience do not have a linear spatial dependence, even after monotonic transformations, and what the impact of this in the estimation of petrophysical properties. The course will show the attendees how to test for linear spatial dependence and introduce the concepts of non-linear geostatistics. Attendees will develop an Excel spreadsheet and a python notebook which can be used for spatial data analysis and non-linear stochastic simulation.
Instructor: Mr Jean-Jacques Biteau (retired from Total E&P, France)
This course on 'Petroleum Exploration Strategy' focuses on aspects like the evaluation of exploration projects (working sequence, costs, economic criteria etc), partnerships, contracts and mining acreage, but also on the missions and role of a geoscience/exploration manager.
Case studies from various regions are an important part of this course.
Instructor: Prof. Dr Alexei Milkov (Colorado School of Mines, USA)
The course enables participants to transform qualitative geological descriptions of plays and prospects into technically robust quantitative success-case and risked volumetric models. Obtained learnings will help participants evaluate probabilities of success (PoS) for exploration plays, segments, prospects, wells and portfolios and to assess the range of petroleum volumes in exploration projects. Examples and case studies come from both conventional and unconventional plays, prospects and wells around the world. The learning objectives are achieved through well-illustrated lectures, numerous hands-on exercises and active class discussions. We will cover:
- Play-based exploration;
- Assessment of success-case volumes;
- Assessment of exploration risks/PoS;
- Post-mortem analysis.
Instructor: Dr Bjorn Wygrala (Schlumberger)
The term “Petroleum Systems” and the technology “Basin and Petroleum Systems Modelling” will be introduced by showing applications in areas with critical exploration challenges, including salt basins and thrustbelts. Technical breakthroughs in the last 10-15 years have been the extension of the technology from 2D to 3D, and the ability to perform multi-phase petroleum migration modelling using different methods in high resolution geological models. This enables temperature, pressure and petroleum property predictions to be made with higher levels of accuracy and in the most complex geological environments such as in the sub-salt or in thrustbelts. Case studies will be used with live software presentations to illustrate key points. Applications of the technology will range from frontier exploration in which large areas with only sparse data are screened, to detailed assessments of exploration risks in structurally complex areas, to petroleum resource assessments of yet-to-find oil and gas.
Instructor: Prof. Dr Michael Poppelreiter (University Technology Petronas)
The most universal, comprehensive and concise descriptive documents on oil and gas wells are well logs. They impact the work of almost every oil field group from geologists to roustabouts to bankers. Familiarity with the applications of well logs is therefore essential for people forging their careers in the oil business. The instructor uses a core-based approach to help participants develop a good grounding in understanding and applying well logging techniques. General principles of physics are presented to explain the functioning of modern logging tools. Wherever possible, the physics of logging measurements is related to everyday tools and applications. Cross-plotting and reconnaissance techniques quickly and efficiently discriminate between water, oil and gas. Error minimization techniques, applicable only to computerized log analysis, produce optimal results. Participants benefit from realistic experience by working in teams on a comprehensive log interpretation exercise.
Instructor: Prof. Dr Richard Swarbrick (Swarbrick GeoPressure Consultancy)
All wells drilled require a pre-drill prediction of pore fluid and fracture pressures which defines the drilling window. This course explains the objectives, methods and uncertainties of prediction, based on extensive global experience. The necessary understanding of the geological/geophysical context of abnormal pressures leading to standard algorithms will be provided. Part of the challenge is terminology and contrasting display methods of geoscience and operations/drilling groups. Both approaches are necessary and investigated in the interactive exercises which will form an essential component of the course.
Instructor: Dr Dirk Nieuwland (NewTec International)
Unconventional hydrocarbon systems require unconventional approaches to decide on drilling locations and development techniques. The information contained in natural fracture systems can be used to support the drilling and well stimulation technique for the development of unconventional hydrocarbon systems such as shale gas. This short course is based on geomechanics as a technique that can be used to understand and to develop unconventional hydrocarbon systems such as shale gas systems, and fractured crystalline basement, where conventional logging and seismic systems are inadequate.
Instructor: Dr Tim Wynn (AGR TRACS International Ltd)
Reservoir modelling for field development planning is a well-accepted process but its application to fractured reservoirs requires specific considerations which are less commonly known. This course describes a practical methodology for building 3D static (“geocellular”) reservoir models for naturally fractured reservoirs using standard modelling software, covering such considerations. The issues addressed include the integration of log, core and seismic data, the sourcing and application of in situ stress data, the process of defining and building the static reservoir model itself, and the creation of output in a form appropriate for dynamic modelling using dual porosity reservoir simulators where appropriate. More complex workflows using discrete fracture networks will also be summarised, as will general issues of fracture description, uncertainty-handling and volumetrics.
Instructor: Prof. Dorrik Stow (Heriot-Watt University)
Sandstones deposited in deep marine environments form important hydrocarbon reservoirs in many basins around the world. Interbedded mudstones can be important as source rocks, as well as acting as barriers, baffles and seals. Deepwater reservoirs are currently the principal target for oil and gas exploration, with over 1600 existing turbidite fields and plays.
Instructors: Dr Mark Bentley (AGR TRACS International) and Prof. Philip Ringrose (Equinor)
This short course will provide an introduction to reservoir model design, covering the following main design elements:
- Model purpose;
- The rock model;
- The property model;
- Model scaling;
- Handling uncertainty.