Reservoir Model Design: How to Build Good Reservoir Models
|Dr Mark Bentley (AGR TRACS International, Aberdeen, United Kingdom)
Prof. Philip Ringrose (Equinor, Trondheim, Norway)
|Geology – Geological Modeling|
|5 CPD points|
3D CARBONATES DEPOSITIONAL SYSTEM GEOSTATISTICS INTEGRATION PERMEABILITY ROCK PHYSICS SEDIMENT
This short course will provide an introduction to reservoir model design, covering the following main design elements:
- Model purpose;
- The rock model;
- The property model;
- Model scaling;
- Handling uncertainty.
In this course, Mark Bentley and Philip Ringrose share their insights into building geological reservoir models, covering clastic and carbonate sedimentary depositional systems, as well as fractured reservoirs. The connection between geology and fluid flow is developed with a focus on designing fit-for-purpose models with the consideration of implications for single-phase and multiphase flow and with examples of application to oil and gas reservoirs and to CO2storage. Integration of seismic data, well data and dynamic data with associated uncertainties are integral to the workflows and methods discussed. This is a shorter version of a 5-day course and so is intended as an introduction to the main concepts.
Know how to approach a reservoir modelling task and assess the key design elements – distinguish between 'good' and 'bad'.
- Introduction: Model Purpose (45 mins);
- Designing the Rock Model (60 mins);
- Property Model issues, Permeability and NTG vs TPM (90 mins);
- Model Scaling (45 mins);
- Handling Uncertainty (45 mins);
- Summing up: the Design Template.
Geologists, geophysicists, petrophysicists, or reservoir engineers who have or wish to work in multi-disciplinary teams on reservoir development projects.
Participants should have good knowledge of at least one component of multi-disciplinary reservoir modeling: e.g., geological modeling, geostatistics, petrophysics, rock physics, or reservoir simulation.
About the instructors
Mark Bentley has spent most of his career working in or leading integrated study teams, initially with Shell and subsequently with TRACS (now part of AGR) where he currently designs and runs courses and directs the TRACS Training programme. His specialist fields of expertise are 3D reservoir modelling and scenario-based approaches to handling subsurface uncertainty and risk. Mark has served as a distinguished lecturer for the SPE and the EAGE, and has delivered training courses on every continent, except Antarctica.
Philip Ringrose is a Specialist in Petroleum Geoscience at Statoil. He has over 30 years of experience in reservoir modelling and field development projects. He is also Adjunct Professor in CO2 storage at the Norwegian University of Science and Technology (NTNU) in Trondheim, Norway. He has published widely on geology and flow in rock media and is Co-Editor of Petroleum Geoscience. Philip was elected as EAGE President in 2014/2015 and is active in the global development of applied geoscience and low-carbon energy solutions.
Explore other courses under this discipline:
Instructor: Dr Leo Eisner (Seismik)
The goal of this class is to explain principles of microseismic monitoring ranging from single monitoring borehole to surface and near surface networks. This class focuses on understanding the measurements made in passive seismic, their use and their uncertainties. Attendees should be able to decide on the best type of microseismic monitoring, design it, and know what kind of processing is needed to achieve their goals. They will also understand the uncertainties in the microseismicity. They will be able to avoid interpretation of uncertain observations. No requirement on prior class is needed, although knowledge of hydraulic fracturing and seismology helps. The course will also discuss the latest developments in microseismicity from source mechanisms, through tomography and anisotropy to reservoir simulations, including pore pressure analysis. The course discusses also social and scientific aspects of (induced) seismicity related to oil and gas reservoir.
Instructor: Dr Enru Liu (ExxonMobil)
The ability to identify fracture clusters and corridors and their prevalent directions within many carbonates and unconventional resources (shale gas, tight gas and tight oil reservoirs) can have a significant impact on field development planning as well as on the placement of individual wells. The characterization of natural fractures is difficult and cannot be achieved by any single discipline or single measurement. Geophysics can identify spatial distributions of fractures and fracture corridors between wells and seismically-derived fracture information to complement (not compete with) other measurements, such as outcrops, core, FMI, cross-dipole and other fracture information. This course is an introduction to the fundamental concepts of seismic fracture characterization by introducing seismic anisotropy, equivalent-medium representation theories of fractured rock and methodologies for extracting fracture parameters from seismic data. With a focus on practical applications, three case studies are presented to demonstrate the applicability, workflow and limitations of this technology: a physical laboratory 3D experiment where fracture distributions are known, a Middle East fractured carbonate reservoir and a fractured tight gas reservoir.
Instructor: Mr Olav Inge Barkved (Petoro)
Time-lapse seismic surveys or 4D seismic provide snapshots of a producing hydrocarbon reservoir and its surroundings. The benefit of the technology in monitoring fluid and pressure changes and to point out bypassed oil or un-drained compartments has been well documented over the last 10–15 years. Still the technology is undergoing rapid development. This course will provide some context on what is driving the dynamic changes linked to producing a hydrocarbon reservoir and what we should expect to observe using seismic technologies in a varied geological setting. It will address key issues that impact the feasibility of time-lapse seismic and evaluate established methods. However, the focus will be on ‘new’ technologies, use of a permanent array, frequent seismic surveying and integration of the data. Examples from the Valhall field will be used extensively to illustrate the potential of seismic data and to articulate issues related to interpretation and integration. This will include data examples from marine towed 4D, frequent surveying using permanently installed sensors, in-well recordings and analysis of passive data, including micro seismicity. Use of seismic surveillance information to support reservoir management, new well delivery and base management will be a central part of the presentation.
Instructor: Prof. Martin Landrø (Norwegian University of Science & Technology)
The course discusses various methods for monitoring subsurface injection of CO2. Specifically, the following topics will be covered:
- Rock physics related to injection of CO2 into porous rock
- Time-lapse seismic methods
- Gravity and electromagnetic methods
- Saturation and pressure effects
- Early detection of leakage
- Mapping overburden geology and identification of potential weakness zones
- Field examples
- Well integrity issues
- Using gas leakage as a proxy to study potential leakage of CO2
- Laboratory experiments of CO2 flooding including acoustic measurements
Instructor: Prof. Serge Shapiro (Freie Universitaet Berlin)
Stimulations of rocks by fluid injections (e.g., hydraulic fracturing) belong to a standard reservoir-development practice. Productions of shale oil, - shale gas, - heavy oil, - geothermal energy require broad applications of this technology. The fact that fluid injection causes seismicity (including microseismicity and, sometimes, significant induced earthquakes) has been well-established for several decades. Waste water injection into rocks, large-scale water reservoir constructions and underground carbon sequestrations are other examples of potentially seismogenic fluid impact on geologic structures. Understanding and monitoring of fluid-induced seismicity is necessary for hydraulic characterization of reservoirs, for assessments of reservoir stimulation results and for controlling seismic risk of fluid injections and production. The course provides systematic quantitative rock-physical and geomechanical fundamentals of all these aspects of the fluid-induced seismicity.
Instructor: Dr Dario Grana (University of Wyoming)
Integrated reservoir modeling workflows provide a set of techniques to create three-dimensional numerical earth models in terms of elastic, petrophysical and dynamic properties of the rocks at different time steps during exploration and production. The course focuses on the quantification of uncertainty in the data, in the physical models and in the predictions in reservoir modeling workflows. Topics include uncertainty quantification in seismic reservoir modeling, geostatistical reservoir simulations, fluid flow modeling, and reservoir monitoring. The link between uncertainty quantification and decision-making will be introduced through decision-making theory. The course will include demonstrations of the methodologies on real case applications.