|Prof. Dr Michael Poppelreiter (Shell, Kuwait)|
|Petrophysics – Rock Physics|
|10 CPD points|
CARBONATES DIAGENESIS MINERALOGY PERMEABILITY STRATIGRAPHY THIN SECTION WELLS
Hands-on microfacies characterization using industry data sets. Analysis: mineralogy, components, pore types, diagenesis. Participants are instructed on how to capture observations such that patterns and rules might be detected. The course encourages participants to think of processes and products during thin section characterization.
Industry data sets are used to illustrate the use of microfacies characterization to help solve operational issues of carbonate fields. Production increase is demanded. Wells (fully cored) show contrary production behavior. The stratigraphy is ‘layer cake’ and both wells are perforated in the highest perm interval of a few meters thick.
Thin sections are linked with petrophysical data, openhole logs and production data. Course participants are encouraged to use thin section descriptions to develop a conceptual model for permeability based on a depositional model architecture based on the investigation of available this sections.
Upon completion of the course, participants will be able to:
- Quality control thin sections.
- Determine the mineralogy of a stained section.
- Characterize fossiliferous and non-fossiliferous components such as ooids or brachiopods.
- Classify the carbonate texture (Dunham) and grain geometry.
The course is designed for geologists, petrophysicists, stratigraphers as well as explorers in academic and industry positions.
Participants should have knowledge of the principles of carbonate geology and a fundamental understanding of petrophysics.
About the instructor
Prof. Dr Michael C. Poppelreiter, Director of the South East Asian Carbonate Research Lab (SEACaRL), Shell Chair in Petroleum Geology at the Department of Geosciences, Universiti Teknologi PETRONAS (UTP). From October 2019 he has been working for Shell Kuwait.
Area of expertise: Shell Subject Matter Expert for carbonate geology, Outcrop and Regional Geological Studies (focus Middle East), Conceptual Modelling, Reservoir Modelling and 3D Digital Modelling, Project management, CO2 in carbonate, Technical Assurance & Capability (TA-2), 25 publications and 2 books on borehole image logs and reservoir geology.
Explore other courses under this discipline:
Instructors: Prof. Dr Franek Hasiuk (Iowa State University) and Dr Sergey Ishutov (University of Alberta)
3D printing is an emerging tool in the geoscience research, reservoir characterization, education, and technical communication. This course covers fundamentals of available techniques and materials for 3D printing and their relative merits. Participants will learn about applications of 3D printing in studies of reservoir rocks, fossils, and geomorphology. The practical section of the course will allow participants: 1) to design 3D-printable models of reservoir rocks that contain pore and fracture networks using CAD and computed tomography data; 2) to render 3D terrain models using GIS data; and 3) to test the accuracy of digital and 3D-printed models.
Instructor: Prof. Dr Michael Poppelreiter (University Technology Petronas)
Hands-on microfacies characterization using industry data sets. Analysis: mineralogy, components, pore types, diagenesis. Participants are instructed on how to capture observations such that patterns and rules might be detected. The course encourages participants to think of processes and products during thin section characterization. Industry data sets are used to illustrate the use of microfacies characterization to help solve operational issues of carbonate fields. Production increase is demanded. Wells (fully cored) show contrary production behavior. The stratigraphy is ‘layer cake’ and both wells are perforated in the highest perm interval of a few meters thick. Thin sections are linked with petrophysical data, openhole logs and production data. Course participants are encouraged to use thin section descriptions to develop a conceptual model for permeability based on a depositional model architecture based on the investigation of available this sections.
Instructor: Prof. Mark Knackstedt (FEI Lithicon)
Digital rock technology offers promise to overcome limitations of conventional core flooding – in particular, sensitivity to coring, core preservation, handling and preparation procedures. This course will provide an in-depth description of digital rock analysis techniques with an emphasis on the fundamentals, tools and practical methods utilized in this workflow. Advanced methods and current limitations will also be discussed. The course will then highlight how this technology can aid the geoscientist and reservoir engineer today by complementing traditional measurements and using the results intelligently to predict and interpret field-scale recovery processes. We describe examples where reconciliation and integration of the different types of data from a fundamental understanding of the pore scale has added value. In particular, the work is used to offer fast turnaround times, aided in our understanding of unconventional reservoir core material and to explain uncertainties and trends from laboratory measurements (e.g., issues with heterogeneity, representative elemental volume, wettability, distribution of remaining oil saturation, EOR processes). We conclude with a discussion on how to extend this technology for reliable prediction of petrophysical & SCAL data along continuous lengths of core material and to integrate the data with other forms of data at increasingly larger scales (log characterization, geomodels and ultimately reservoir simulators).
Instructors: Dr Per Avseth (Independent Consultant) and Prof. Dr Tor Arne Johansen (University of Bergen)
The field of rock physics represents the link between qualitative geologic parameters and quantitative geophysical measurements. Increasingly over the last decade, rock physics stands out as a key technology in petroleum geophysics, as it has become an integral part of quantitative seismic interpretation. Ultimately, the application of rock physics tools can reduce exploration risk and improve reservoir forecasting in the petroleum industry.
Instructor: PhD José M. Carcione (OGS)
This course presents the fundamentals of physics and numerical simulation of wave propagation in anisotropic, anelastic and porous media, including the analogy between acoustic waves (in the general sense) and electromagnetic (EM) waves. The emphasis is on geophysical applications for hydrocarbon exploration, but researchers in the fields of earthquake seismology, rock physics, and material science. Moreover, the course illustrates the use of seismic and EM modelling, with an account of the numerical algorithms for computing the synthetic seismograms and radargrams, including applications in the field of geophysical prospecting, seismology and rock physics, such as evaluation of methane hydrate content, upscaling techniques, detection of overpressure, Antarctic and permafrost exploration, exploration of the Earths deep crust, time-lapse for monitoring of CO2 injection, etc.
Instructor: Prof. Tapan Mukerji (Stanford University)
This course covers fundamentals of Rock Physics ranging from basic laboratory and theoretical results to practical “recipes” that can be immediately applied in the field. Application of quantitative tools for understanding and predicting the effects of lithology, pore fluid types and saturation, saturation scales, stress, pore pressure and temperature, and fractures on seismic velocity. We will present case studies and strategies for quantitative seismic interpretation using statistical rock physics work flows, and suggestions for more effectively employing seismic-to-rock properties transforms in Bayesian machine learning for reservoir characterization and monitoring, with emphasis on seismic interpretation and uncertainty quantification for lithology and subsurface fluid detection.