Overview of EM Methods with a Focus on the Multi-Transient Electromagnetic (MTEM) Method
|Dr Bruce Hobbs (University of Edinburgh, United Kingdom)|
|Near Surface – Non-Seismic Methods|
|5 CPD points|
2D 3D INVERSION MARINE MULTI‑TRANSIENT NEAR SURFACE OCEANOGRAPHY RECIPROCITY RESISTIVITY SATURATION
Reservoir rocks contain water, hydrocarbons or a mixture of both. The resistivity of those rocks is a sensitive indicator of hydrocarbon saturation levels and may be determined remotely by electromagnetic (EM) methods. The multi-transient electromagnetic method (MTEM) is a technology with sufficient resolving power to delineate potential reservoirs and to monitor hydrocarbon movements in a commercial context.
The objective of this course is to provide an understanding and appreciation of the technology and its capabilities so that geoscientists will feel confident in incorporating the method into their appraisal and decision-making workflows. Another objective is to understand the contribution that MTEM technology can make to appraisals and work-flow in exploration and monitoring.
The course is divided into four sections. The first gives a brief summary of EM methods and introduces the new MTEM technology. Following sections provide details of the method, its practical realisation for land and marine surveys and some case studies.
1. EM Methods and Introduction to MTEM
- Resistivity and its importance in the oil industry
- Overview of EM and electrical methods
- Introduction to the MTEM method
- Overview of applications
2. The MTEM method: Acquisition and Processing
- Step and impulse response functions
- Step and pseudo-random binary sequence (PRBS) source functions
- Repeatability and reciprocity
- Layout and acquisition parameters
- Processing and quality control
- In-field results - real time appraisal (RTA) of subsurface prospects
3. Modelling and Inversion
- 1D modelling of step and impulse response functions
- 3D modelling of complex structures
- Extraction of dipole-dipole DC resistivity as a by-product of MTEM
- 2D inversion of DC resistivity
- 1D inversion of step and impulse response functions
- Collation of 1D inversions
4. Equipment and applications
- Three generations of field equipment for land surveys
- Marine Equipment
- Case studies including surveys in France, Canada, Central America and the North Sea
Participants should have knowledge of basic science.
About the instructor
Bruce Hobbs is Visiting Professor at the University of Edinburgh and is co-founder, with Anton Ziolkowski, David Wright and Leon Walker, of the company MTEM Ltd. He was Director of Pentland Geophysics.
Bruce graduated from Exeter University with B.Sc (1965) and Ph.D (1968) in mathematics and his 41 years of research have mainly involved electromagnetic induction studies, inversion theory and near surface geophysics. Academic positions include faculty positions at Laurentian University, Ontario and The University of Edinburgh, Scotland, a research fellowship at Cambridge University and sabbaticals at Scripps Institute of Oceanography as a Green Scholar, the Lunar and Planetary Laboratory at the University of Arizona (twice) as Adjunct Professor and the University of Paris (twice) as Visiting Professor.
Bruce has held posts as Geophysical Secretary and Vice-President of the Royal Astronomical Society, London; Chairman, Joint Association for Geophysics, UK; Chairman, Working Group 3, Division 1 of the International Association of Geomagnetism and Aeronomy and has organised and run many workshops on electromagnetic induction and resistivity.
Explore other courses under this discipline:
Instructor: Mr Jaap Mondt (Breakaway)
Although in the search for hydrocarbons seismic plays the dominant role, complementary data can be very useful. A clear example is that seismic can clearly determine reservoir geometries based on acoustic impedance changes but is less sensitive to the pore-fluids. Electromagnetic measurements, such as Controlled Source EM (CSEM) measures resistivity directly and hence can discriminate between brine and hydrocarbon fill.
You might wonder about the poorer resolution of EM compared with seismic. Indeed, that is the case, but by combining the two independent sources of information, then seismic will give the structure (container) which then can be used as a constraint for the inversion of EM. Another application is in the realm of determining the shape of allochthone salt bodies below which hydrocarbons can be present.
Numerous applications can be mentioned in relation to shallow seismic. An obvious one is the use of Ground Penetrating Radar (GPR) for investigating archaeological sites or determining the depth to upwelling deep salt-water due to severe pumping of fresh water for irrigation.
Instructor: Dr Asbjørn Nørlund Christensen (Nordic Geoscience)
In the past fifteen years airborne gravity gradiometry (AGG) has gained acceptance as a cost effective exploration tool in a variety of minerals and petroleum exploration programs. This one-day course is intended for all explorers considering using AGG in their exploration efforts.
Instructor: Dr Yaoguo Li (Colorado School of Mines)
Gravity and magnetic data are among the oldest geophysical data acquired for the purpose of resource exploration and exploitation. They currently also have the widest areal coverage on the Earth, span a great range of scales, and play important roles in mineral, energy, and groundwater arenas. This course will focus on the methodology, numerical computation, solution strategy, and applications of 3D physical property inversions of gravity and magnetic data sets. The course is designed to have two tracks in order to meet the different needs of EAGE community in mineral exploration and in oil & gas exploration and production. We achieve this by dividing the course into two parts, and cover the methodologies common in potential-field methods in Part-I and discuss tools and applications specific to mineral exploration or oil & gas reservoir monitoring in Part-II.
Instructor: Dr Bruce Hobbs (University of Edinburgh)
Following a brief summary of electromagnetic methods for exploration, the theoretical basis of the MTEM method is presented together with practical methods of data acquisition and processing. Modelling and inversion for this method are described and land and marine case studies are presented.
Instructor: Dr Alessandro Ferretti (Tele-Rilevamento Europa (TRE))
Satellite radar data for surface deformation monitoring are gaining increasing attention, and not only within the oil and gas community. They provide a powerful tool for remotely measuring extremely small surface displacements over large areas and long periods of time, without requiring the installation of in-situ equipment. However, apart from remote sensing and radar specialists, only a relatively small number of geoscientists and engineers understand how a radar sensor orbiting the Earth at about 7 km/s from 700km above the Earth's surface can actually measure ground displacements of a fraction of a centimetre. This course provides a step-by-step introduction to satellite radar sensors, SAR imagery, SAR interferometry and advanced InSAR techniques. Rather than a tutorial for remote sensing specialists, the course starts from very basic concepts and explain in plain language the most important ideas related to SAR data processing and why geoscientists and engineers should take a vested interest in this new information source.
Instructor: Dr Laura Valentina Socco (Politecnico di Torino)
The use of surface wave analysis for near surface characterisation has dramatically increased in the last decade thanks to the possibility offered by this technique for shear wave velocity estimation. New tools and approaches have been developed for surface wave data acquisition and analysis to make the method robust and suitable to complex systems.