Conduits and Seals in Hydrocarbon Reservoirs: A Geomechanical Approach
|Dr Dirk Nieuwland (NewTec International, Leiden, Netherlands)|
|Petrophysics – Geomechanics|
|10 CPD points|
BASEMENT CASE STUDY FAULTS FRACTURES GEOMECHANICS MECHANICS PERMEABILITY POROSITY ROCK PHYSICS
Flow of oil and gas through porous reservoir rock is controlled by the permeability of the reservoir. In the simplest case this is a single permeability system that is completely controlled by the rock properties of the reservoir. The presence of faults and/or fractures complicates the flow by creating a dual porosity/permeability system when open fractures are present, or by creating barriers to flow or even reservoir compartmentalization when sealing faults or fractures are present.
In this short course the origin of faults and fractures and their mechanical properties will be discussed in a framework of geo-mechanics. Understanding the physical processes of fault and fracture formation enables the development of predictive models even in structurally complicated reservoirs.
A combination of theory, case histories and exercises will be used to familiarize the participants of this short course with the subjects. The nature of a short course is such that a full in-depth treatment of the mechanics is not possible due to lack of time; the course emphasis will therefore be on informative case histories. Exercises will make up part of the course but in view of the available time, they will be relatively short.
The participants will be able to decide on the appropriate fault sealing mechanism and perform a fault seal prediction. Location and orientation of natural open fracture systems can be predicted, using a variety of techniques. The methods taught in this course are universally applicable, including for exploration, field development and underground storage of natural gas or CO2.
- Introduction to tectonic regimes and associated stress systems;
- Analogue model demonstration experiment.
- Introduction to geo-mechanics
- Case history
- Mechanics of natural fracture systems
- Case history
- Mechanics of sealing fracture/fault systems
- Case histories
Geologists, geophysicists and reservoir engineers who have to work with faulted and fractured reservoirs will benefit from this short course. The topic is relevant for exploration as well for production.
Participants should have knowledge of basic geology, geophysics, reservoir engineering and structural geology.
Also some practical experience in E&P projects is recommended.
About the instructor
Dr Nieuwland has 39 years of experience as a geologist of which 35 years in oil and gas exploration and production. He has published numerous papers in this field and edited two books in the Special Publication series of the Geological Society of London.
One of NewTec's geo-mechanical field models resulted in adding a billion bbls of oil to the reserves of a tight naturally fractured oil reservoir, including accurate prediction of open fracture locations and orientation, in-situ stresses and reservoir quality. Other models have successfully guided exploration, appraisal and development in complex geological settings, including a world first successful prediction of open fractures in fractured oil bearing crystalline basement.
Explore other courses under this discipline:
Instructors: Prof. Dr Franek Hasiuk (Iowa State University) and Dr Sergey Ishutov (University of Alberta)
3D printing is an emerging tool in the geoscience research, reservoir characterization, education, and technical communication. This course covers fundamentals of available techniques and materials for 3D printing and their relative merits. Participants will learn about applications of 3D printing in studies of reservoir rocks, fossils, and geomorphology. The practical section of the course will allow participants: 1) to design 3D-printable models of reservoir rocks that contain pore and fracture networks using CAD and computed tomography data; 2) to render 3D terrain models using GIS data; and 3) to test the accuracy of digital and 3D-printed models.
Instructor: Prof. Dr Michael Poppelreiter (University Technology Petronas)
Hands-on microfacies characterization using industry data sets. Analysis: mineralogy, components, pore types, diagenesis. Participants are instructed on how to capture observations such that patterns and rules might be detected. The course encourages participants to think of processes and products during thin section characterization. Industry data sets are used to illustrate the use of microfacies characterization to help solve operational issues of carbonate fields. Production increase is demanded. Wells (fully cored) show contrary production behavior. The stratigraphy is ‘layer cake’ and both wells are perforated in the highest perm interval of a few meters thick. Thin sections are linked with petrophysical data, openhole logs and production data. Course participants are encouraged to use thin section descriptions to develop a conceptual model for permeability based on a depositional model architecture based on the investigation of available this sections.
Instructor: Prof. Mark Knackstedt (FEI Lithicon)
Digital rock technology offers promise to overcome limitations of conventional core flooding – in particular, sensitivity to coring, core preservation, handling and preparation procedures. This course will provide an in-depth description of digital rock analysis techniques with an emphasis on the fundamentals, tools and practical methods utilized in this workflow. Advanced methods and current limitations will also be discussed. The course will then highlight how this technology can aid the geoscientist and reservoir engineer today by complementing traditional measurements and using the results intelligently to predict and interpret field-scale recovery processes. We describe examples where reconciliation and integration of the different types of data from a fundamental understanding of the pore scale has added value. In particular, the work is used to offer fast turnaround times, aided in our understanding of unconventional reservoir core material and to explain uncertainties and trends from laboratory measurements (e.g., issues with heterogeneity, representative elemental volume, wettability, distribution of remaining oil saturation, EOR processes). We conclude with a discussion on how to extend this technology for reliable prediction of petrophysical & SCAL data along continuous lengths of core material and to integrate the data with other forms of data at increasingly larger scales (log characterization, geomodels and ultimately reservoir simulators).
Instructors: Dr Per Avseth (Independent Consultant) and Prof. Dr Tor Arne Johansen (University of Bergen)
The field of rock physics represents the link between qualitative geologic parameters and quantitative geophysical measurements. Increasingly over the last decade, rock physics stands out as a key technology in petroleum geophysics, as it has become an integral part of quantitative seismic interpretation. Ultimately, the application of rock physics tools can reduce exploration risk and improve reservoir forecasting in the petroleum industry.
Instructor: PhD José M. Carcione (OGS)
This course presents the fundamentals of physics and numerical simulation of wave propagation in anisotropic, anelastic and porous media, including the analogy between acoustic waves (in the general sense) and electromagnetic (EM) waves. The emphasis is on geophysical applications for hydrocarbon exploration, but researchers in the fields of earthquake seismology, rock physics, and material science. Moreover, the course illustrates the use of seismic and EM modelling, with an account of the numerical algorithms for computing the synthetic seismograms and radargrams, including applications in the field of geophysical prospecting, seismology and rock physics, such as evaluation of methane hydrate content, upscaling techniques, detection of overpressure, Antarctic and permafrost exploration, exploration of the Earths deep crust, time-lapse for monitoring of CO2 injection, etc.
Instructor: Prof. Tapan Mukerji (Stanford University)
This course covers fundamentals of Rock Physics ranging from basic laboratory and theoretical results to practical “recipes” that can be immediately applied in the field. Application of quantitative tools for understanding and predicting the effects of lithology, pore fluid types and saturation, saturation scales, stress, pore pressure and temperature, and fractures on seismic velocity. We will present case studies and strategies for quantitative seismic interpretation using statistical rock physics work flows, and suggestions for more effectively employing seismic-to-rock properties transforms in Bayesian machine learning for reservoir characterization and monitoring, with emphasis on seismic interpretation and uncertainty quantification for lithology and subsurface fluid detection.